Quote Originally Posted by jcustis View Post
You know, it need not...all it would take is a graduated level that could attach to the side of the mil-std 1913 Picatinny rail. Our current M224 60mm has that built into the firing assembly. It just needs to be small, lit by a tritium ampule, and could clip on via any number of attachment means that are already in use for side-mounted sling swivels.

A couple rounds to get the thing zeroed and locked down with Loctite, and there you have it. No need to fiddle with a sling marking system that would rely on the grenadier to pause and adjust it to the appropriate length for use. There would be slight variation due to the surface the buttstock rests on (sand, gravel, boot tip, etc.). The only thing limiting this setup would be the degree of accuracy required in the requirement document, as it related to mounting the sight to the rail, adjusting the rail in relation to the launcher receiver, etc.

We might never get there due to tight tolerances required by whomever would generate the specifications, but my light bulb just clicked on.
Somebody's light bulb clicked on a little earlier, and designed the (rifle ) grenade sight T59, for the use of low-angle and high-angle fire. It could be fitted to pretty much every US WWII rifle and carbine.

Slings were already marked with tape in WWII, usually with the aid of a clinometer. When used in the high-angle role, an additional, rimmed .45 propulsion cartridge was inserted into the launcher tube.

The interesting thing about rifle grenades was the broad range of uses, already in WWII. Here are just some of the lesser known ones:

- After removing the detonator, a 30-yard cordtex (explosive 1/4 inch cord) was tied to the (Mills) rifle grenade and shot across the minefield, clearing a long and 8-inch narrow path. By using two such paths 10 feet apart, a cordtex net could be dragged across the minefield to open a 10-feet street (Source: British Commandos, Nr.1 of the often mentioned Special Series)

- "Grapnel" Grenades were first improvised to clear from a covered position trip-wire up to a 100 yards away. A simple AT rifle grenade got almost completely stripped down and a wooden plug with three inserted hooks got fixed with a screw as new head. A heavy 150 yard chalk line was attached and coiled up. ( Combat Lessons 4, WWII series)

- In a similar way com. wire was layed across streams, to up to 130 yards. (Combat lessons 6, WWII series)

- 60mm Mortar bombs were attached by wire and pliers to the grenade projectors M7 and M1 and fire to up to a range of 110 yards. Used to clear houses and hedgerows. (Combat lessons 6, WWII series)

- WP (smoke) rifle grenades with reduced WP charge were used by grenadiers to mark hidden targets, especially for the supporting tanks. (The reduction of the WP avoided the concealment by the very smoke) (Combat lessons x, WWII series)

- Some German rifle grenades could also be thrown by hand, lightening the combat load. This was considered to be very useful for mobile, light units operating far from the next base. ( Other countries had also special rifle adaptors for hand grenades) (Small unit action in Russia)

All in all it seems that the rifle grenade can still be useful in some "odd" or special jobs which need an odd or oversized warhead shape. Breeching, Mine-clearing, Grapnelling are just some of them.

The 40mm grenades at one side of the spectrum and the shoulder-fired weapons on the other seem to cover the big rest well enough. We will see how well the 25mm grenades widen that spectrum.