Page 5 of 5 FirstFirst ... 345
Results 81 to 100 of 100

Thread: Mechanized Infantry Perceptions 2010

  1. #81
    Council Member
    Join Date
    Jul 2009
    Location
    Melbourne
    Posts
    175

    Default

    Quote Originally Posted by jcustis View Post
    Compost,

    What's your background? Have you ever maneuvered in an APC or AIFV?
    My background is defence analysis. Started with Australian Defence Department in 1960s and also joined CMF (Army Reserve) infantry for more perspective. Did one year tour in SVN as civilian liaison officer. Resigned from CMF in 1970. Continued with Defence in technical areas, project analysis and management until 1990s when left to escape Canberra.

    Have had numerous trips/many hours on board M113s in Oz and SVN. During a 1980s Staff College course did a rough track circuit in the turret and then the hull of an ASLAV-25. No experience inside other wheeled/tracked APCs, AIFVs or armoured scouts.

  2. #82
    Council Member
    Join Date
    Jul 2009
    Location
    Melbourne
    Posts
    175

    Default

    Jcustis,

    Here’s a current example. ASLAV is operated by cavalry units in Armoured Corps. ASLAV-25 with 2-man turret is arranged for 3 crew and rated for up to 6passengers on two side-facing bench seats each accessed via a narrow rear door. However ASLAV-25 is operated with 3 crew and up to 4 scouts while ASLAV-25 (Recce) is often operated with just 3 crew. ASLAV-PC (turretless with pintle-mounted MG or RCWS) has 2 crew and cabin is arranged with 2 inward-facing benches for 7 scout troopers accessed via a rear ramp/door.

    Stryker may be larger and heavier but wager its most used troop-carrying versions resemble ASLAVs in terms of function and capacity (with say at most 2 more seats). Similarly Bradley M3 has probably been assessed as more useful and successful than Bradley M2.

    Interested to learn your view on APCs, AIFVs and armoured scouts.

  3. #83
    Council Member 82redleg's Avatar
    Join Date
    Feb 2007
    Location
    USAWC, Carlisle Bks
    Posts
    224

    Default

    Quote Originally Posted by Compost View Post

    Stryker may be larger and heavier but wager its most used troop-carrying versions resemble ASLAVs in terms of function and capacity (with say at most 2 more seats). Similarly Bradley M3 has probably been assessed as more useful and successful than Bradley M2.

    Interested to learn your view on APCs, AIFVs and armoured scouts.
    Actually, the most common Stryker variant is the M1126 ICV (Infantry Carrier Vehicle) with a crew of 2 + a 9-man squad. There are 108+/BDE (4/PLT: 3 of 4 carry 9-man rifle squad, the last carries the 7-man weapons squad, FO and any attachments)[108 is the number in the 27 rifle platoons- there are additional M1126 in IN CO HQs, and other orgs that don't carry rifle squads, but I don't know exactly how they are employed]

    The M1127 RV (Recon Vehicle) is used more like you describe. There are 51 in the BDE: 13 in each of 3 Recon Troops (3 x 4 + 1 for the CDR) + another 4 in each IN BN recon platoon. The Recon Troop platoons have a crew of 2+4 dismounts, the IN BNs have a crew of 2, plus 3 x 5-man recon squads that probably sit in 3 of the vehicles, with the last used by the PL for any attachments.

    There are also Engineer Squad Strykers (which also carry a 9-man squad, but that includes the crew of the vehicle), Fire Support Vehicles (4-man crew, really a forward observer vehicle), Command Vehicles (heavy on commo, for headquarters types), MGS, Ambulances, ATGM carriers, Mortar Carriers and NBC Recon Vehicles.

  4. #84
    Council Member jcustis's Avatar
    Join Date
    Mar 2006
    Location
    SOCAL
    Posts
    2,152

    Default

    Quote Originally Posted by Compost View Post
    My background is defence analysis. Started with Australian Defence Department in 1960s and also joined CMF (Army Reserve) infantry for more perspective. Did one year tour in SVN as civilian liaison officer. Resigned from CMF in 1970. Continued with Defence in technical areas, project analysis and management until 1990s when left to escape Canberra.

    Have had numerous trips/many hours on board M113s in Oz and SVN. During a 1980s Staff College course did a rough track circuit in the turret and then the hull of an ASLAV-25. No experience inside other wheeled/tracked APCs, AIFVs or armoured scouts.
    I figured as much, and asked that because only someone who has been in M113s and MOWAG-type vehs would understand what it is like to be in one of those turrets.

    I've been in M113s and went force-on-force at Shoalwater Bay with some of your 2nd/14th Light Horse Regiment boys a bit ago (ASLAVs and Strykers vs. LAV-25s) and although no longer posted there, served in ourr Light Armored Reconnaissance Bns for some time.

    I will say this, there's a reason why we joke that the Canadian-built LAV-25s could only fit six troops if they were Canadians. You're lucky to squeeze four pax in there amongst all the other gear and supplies required to fight with.

    ETA: And for the record, I think the Corps' LAR units are pound-for-pound the most lethal units available.
    Last edited by jcustis; 05-19-2013 at 08:21 PM.

  5. #85
    Council Member gute's Avatar
    Join Date
    Jul 2008
    Location
    Portland, OR
    Posts
    322

    Default

    I'm currently reading the book Carnivore which is about a cav scout soldier and his units fight during the invasion of Iraq. The author writes about engaging T-72 tanks with the Bradley 25mm depleted uranium or DU rounds and killing the tanks. My question has to do with the Ground Combat Vehicle and arming it with a 25mm cannon and not something bigger. Could these type of experiences in Iraq had something to do with the idea of arming the GCV with a 25mm cannon? Or, is it simply about going with the status quo? Do U.S. Army armor thinkers believe that in the future the type of armor we are most likely to face will be Soviet design like the T-72 and the DU rounds will be sufficient to destroy the vehicles. The author did say that if the T-72 hit his Bradley with its 125mm the crew would be toast - no suprise there.

  6. #86
    Council Member Fuchs's Avatar
    Join Date
    May 2008
    Posts
    3,189

    Default

    Quote Originally Posted by gute View Post
    My question has to do with the Ground Combat Vehicle and arming it with a 25mm cannon and not something bigger. Could these type of experiences in Iraq had something to do with the idea of arming the GCV with a 25mm cannon?
    Other armies went from 30 to 40 caseless (UK), from 20 to 30 (Germany), added a 100 mm next to their classic 30 mm (Russia) or kept using something in the 23-40 mm range. Most IFV purchases of the last few years appear to have been about 30-35 mm main guns.


    I suppose the U.S.Army simply stuck with what's established in its training and ammunition stock system. I have yet to see or meet any source claiming that 25 mm is optimal. The problem is that the autocannon calibre choice is a choice between the devil and the deep sea. It's unsatisfactory in some regards, no matter what.
    25 mm does not chew or bite easily through walls unless you use expensive APFSDS, and that's messy in infantry support because of all the sabots. 35 or 40 mm doesn't allow you to carry many rounds. Telescopic ammo such as used by the CTA 40 is more compact, but you could still carry more if you stuck with a smaller calibre.

  7. #87
    Council Member jcustis's Avatar
    Join Date
    Mar 2006
    Location
    SOCAL
    Posts
    2,152

    Default

    I would offer that there are clear distinctions between an infantry fighting vehicle, capable of killing comparable vehicles with its main cannon or ancillary ATGM, and an infantry support vehicle, capable of rendering support in any sort of built-up environment.

    One needs to consider how the US Army has organized and equipped itself in the past to accomplish those two discrete tasks, before asking the question about caliber size for any main cannon.

    When the Bradley was developed, side saddle TOW launchers were emplaced in the design, but the unit organizations still M1 tanks mixed in to provide the wall-busting support required, and the development of 120mm ammunition has followed an arc aimed at penetrating and reducing heavy cover.

    As the Army transitioned to the Stryker and its remote weapon system of no larger than 40mm AGL or .50 HMG, it bought the 105mm Mobile Gun System variant to provide infantry support within those formations, since the M1's 120mm main gun was lost.

    The US has never had a one-design-fits-all mindset when it comes to mechanized infantry operations, like the Russians have through the BMP-1 through -3 series of IFVs, and there is some inherent flexibility (and for sure some weaknesses) from that approach.

    It seems the US Army stuck with what was in its training and ammunition system not so much out of a desire to avoid additional cost, but because that system and combination of capabilities has proven capable enough to meet the infantry's needs. If it were found woefully wanting, there would for sure be pressure to adjust and implement new systems, but the current crop of tools is generally adequate and the US Army mindset has recently trended towards C4ISR upgrades before ordnance changes.

    I would guess that we won't see a main cannon for another couple of generations.

  8. #88
    Council Member jcustis's Avatar
    Join Date
    Mar 2006
    Location
    SOCAL
    Posts
    2,152

    Default

    Quote Originally Posted by gute View Post
    I'm currently reading the book Carnivore which is about a cav scout soldier and his units fight during the invasion of Iraq. The author writes about engaging T-72 tanks with the Bradley 25mm depleted uranium or DU rounds and killing the tanks. My question has to do with the Ground Combat Vehicle and arming it with a 25mm cannon and not something bigger. Could these type of experiences in Iraq had something to do with the idea of arming the GCV with a 25mm cannon? Or, is it simply about going with the status quo? Do U.S. Army armor thinkers believe that in the future the type of armor we are most likely to face will be Soviet design like the T-72 and the DU rounds will be sufficient to destroy the vehicles. The author did say that if the T-72 hit his Bradley with its 125mm the crew would be toast - no suprise there.
    It turned out to be abandoned the next day when we inspected it, but one night my gunner picked up a BMP-2 in his sights at about 800m, right after the vehicle came to a halt. He hit it with APDS-T (the non-depleted uranium AP round) and the penetrators still went through it like a hot knife through butter. It was a flank shot and not against the frontal armor, but I have no doubt we would have killed it just the same.

    I've heard anecdotes of 25mm killing T-55s, but not -72s (or at least I never believed them).

    One funny story was when one of our scout team leaders fired a HEAA round from a 83mm SMAW against the flank of an abandoned T-72 at a couple hundred meters. The first round flew over the turret by an inch or so because he failed to adjust a sight setting. The second round hit square in a sponson box, detonated, but barely scratched the hull he was trying to penetrate.

    The whole situation was remedied when an industrious young combat engineer corporal and his two subordinates crawled inside with a satchel charge. The resulting explosion of the explosives, and every round and bit of propellant inside the hull, sent the turret somersaulting through the air by a hundred feet or so. This was followed by a dejected scout climbing back aboard his vehicle to face the ribbing of the crew.

  9. #89
    Council Member Fuchs's Avatar
    Join Date
    May 2008
    Posts
    3,189

    Default

    I'm sure you meant "depleted uranium". It makes no sense to use non-depleted uranium for such a purpose.


    T-55s have late WW2-like side armour and rear armour is even weaker. All MBTs have ballistic windows - sights, hatches, turret ring, barrel - and can occasionally be penetrated by really weak penetrators.

    External equipment - including CITV and externally stored personal items - is even more generally vulnerable.

    The ability to penetrate should thus not be judged by anecdotes, but by the ability to penetrate
    front turret
    upper and lower glacis
    side turret
    side hull

    25 mm is quite unsatisfactory even against a T-55 if you look at these. Lower hull sides are the only large surfaces which an autocannon can penetrate reliably, and I doubt a 25 mm APDS or APFSDS could do so even at a perfect angle.


    Basic BMPs are notoriously thin-walled. Their protection is APC-like; they keep most bullets, most fragments and AP mine effects out and that's about it.
    Upgraded BMPs on the other hand can be loaded with so much extra protection that even 30 mm APFSDS and AT4s would not penetrate front or sides.

  10. #90
    Council Member jcustis's Avatar
    Join Date
    Mar 2006
    Location
    SOCAL
    Posts
    2,152

    Default

    Okay, yes--the APDS round that is not the one with a penetrator formed from depleted uranium. That is what I meant, though most can probably infer the point I was getting at.

    To your point about 25mm and inadequacy against a T-55 (or any tank for that matter), it shouldn't be employed against a T-55, so inadequacy is irrelevant. If a BMP is approaching tank weight and protection, don't bother trying to kill it with an IFV direct-fire weapon. Get a Javelin, or a tank.

    I guess you could say this goes back to gute's question about sticking with a 25mm, especially in light of the trend in BMP (and comparable AFV/IFV) protection. There is no way threat capabilities are ignored, but rather planners are looking at smarter ways to counter the threat. It also goes back to the point about trying to kill a monster IFV with another IFV. If the enemy wants to push the armor/weight boundaries, maybe we should just let them, but remain flexible with our task organization.

    Vehicles look great when they are all pristine in a glossy manufacturer's pamphlet or an edition of Janes, but in the field, amidst the muck and the mire, advertised capabilities become an entirely different proposition. There are penalties to pay with the protection.

    Ona slightly related tangent, has anyone been catching Russian-narrated videos of Syrian armor in the attack, or of the absolute havoc being wrecked on the tanks when they let their security down and the insurgents get to employ RPG-29s? Eye-opening for sure...
    Last edited by jcustis; 07-21-2013 at 06:38 PM.

  11. #91
    Council Member gute's Avatar
    Join Date
    Jul 2008
    Location
    Portland, OR
    Posts
    322

    Default

    Quote Originally Posted by jcustis View Post
    Ona slightly related tangent, has anyone been catching Russian-narrated videos of Syrian armor in the attack, or of the absolute havoc being wrecked on the tanks when they let their security down and the insurgents get to employ RPG-29s? Eye-opening for sure...
    Youtube?

  12. #92
    Council Member gute's Avatar
    Join Date
    Jul 2008
    Location
    Portland, OR
    Posts
    322

    Default

    I watched a Youtube video of a Syrian tank hit by a RPG-29. It looked like the tank was hit on the very top of turret or the deck right behind the turret. Scary stuff. Smoke coming out of the hatches and the gun and then a flame shootin 30 feet in the air. I can't believe one dude got out or he was standing outside of the tank near the rear.

  13. #93
    Council Member jcustis's Avatar
    Join Date
    Mar 2006
    Location
    SOCAL
    Posts
    2,152

    Default

    On another forum I frequent, quite a few tankers ran the vid back and forth in slow motion. They agreed that the guy seen holding his charred arms in the air to his sides was previously inside the turret area (yup, with the hatches closed). When the round hit, the detonation blew hatches open and the tanker out of the vehicle.

    The plume of fire rushing out is the propellant of the main gun's rounds burning. That's one of the design limitations of the T-72. It's going to go up like a Roman candle if that stuff is ignited, and it is susceptible to lighting because the semi-combustible cases are exposed at the bottom of the turret basket.

    That guy must have died an especially gruesome and painful death.
    Last edited by jcustis; 07-22-2013 at 12:57 AM.

  14. #94
    Council Member gute's Avatar
    Join Date
    Jul 2008
    Location
    Portland, OR
    Posts
    322

    Default

    Quote Originally Posted by jcustis View Post
    On another forum I frequent, quite a few tankers ran the vid back and forth in slow motion. They agreed that the guy seen holding his charred arms in the air to his sides was previously inside the turret area (yup, with the hatches closed). When the round hit, the detonation blew hatches open and the tanker out of the vehicle.

    The plume of fire rushing out is the propellant of the main gun's rounds burning. That's one of the design limitations of the T-72. It's going to go up like a Roman candle if that stuff is ignited, and it is susceptible to lighting because the semi-combustible cases are exposed at the bottom of the turret basket.

    That guy must have died an especially gruesome and painful death.
    It blew him out of the turret? Holy Crap!

    Do you mind mentioning the other forum? If so a PM is cool or if not I understand.

  15. #95
    Council Member jcustis's Avatar
    Join Date
    Mar 2006
    Location
    SOCAL
    Posts
    2,152

    Default

    It was on Lightfighter.net. It will require joining and posting a brief introduction is preferred before posting if you ever get around to it.

    Give me a day and I'll get you the link to the discussion.

  16. #96
    Council Member jcustis's Avatar
    Join Date
    Mar 2006
    Location
    SOCAL
    Posts
    2,152

    Default

    Found it: http://http://www.lightfighter.net/t...43236916266323

    Most members posting to the discussion are real deal, experienced tread heads.

  17. #97
    Council Member gute's Avatar
    Join Date
    Jul 2008
    Location
    Portland, OR
    Posts
    322

    Default

    Quote Originally Posted by jcustis View Post
    Found it: http://http://www.lightfighter.net/t...43236916266323

    Most members posting to the discussion are real deal, experienced tread heads.
    Already a member. Thanks for the information.

  18. #98
    Council Member ganulv's Avatar
    Join Date
    Dec 2010
    Location
    Berkshire County, Mass.
    Posts
    896

    Default

    Quote Originally Posted by jcustis View Post
    That guy must have died an especially gruesome and painful death.
    It amazes me he was able to was able to pick himself up off the ground, much less run for cover, given how concussed he must have been.
    If you don’t read the newspaper, you are uninformed; if you do read the newspaper, you are misinformed. – Mark Twain (attributed)

  19. #99
    Council Member
    Join Date
    Jul 2009
    Location
    Melbourne
    Posts
    175

    Default US combat vehicle researchers stumble ... again

    http://www.army.mil/article/131126/R...mbat_vehicles/

    Operational and tactical mobility could be improved by reducing the design weight of armoured reconnaissance vehicles and early-entry AFVs. Reduction of design weight might also serve to reduce size as a target and also observability. But reducing or limiting the weight of main force AFVs reduces potential armour protection and the weight and bulk of sensors and munitions provided for combat performance and endurance.

    Looking on the bright side, researching a blanket 40% reduction in the weight of AFVs might be a usefully memorable exercise in futility.

  20. #100
    Council Member
    Join Date
    Feb 2007
    Location
    The Green Mountains
    Posts
    356

    Default

    Since this thread has been resurrected, some good stuff in the online Journal of Military Operations lately. The last issue had an article by Jim Storr looking at armored reconnaissance (specifically the value of stealth) and Council member William F. Owen discussed the IFV as a doctrinal wrong turn in Issue 3. Both articles well worth a read, as is almost all of what they publish.

    (Added by Moderator)

    Link to cited journal, free after registration:https://www.tjomo.com/
    Last edited by davidbfpo; 08-06-2014 at 09:52 AM. Reason: add link

Similar Threads

  1. Infantry Unit Tactics, Tasks, Weapons, and Organization
    By Norfolk in forum Trigger Puller
    Replies: 306
    Last Post: 12-04-2012, 05:25 PM
  2. Mechanization hurts COIN forces
    By Granite_State in forum Futurists & Theorists
    Replies: 142
    Last Post: 11-22-2010, 09:40 PM
  3. Infantry accompanying load carriers
    By Compost in forum Trigger Puller
    Replies: 39
    Last Post: 02-10-2010, 05:06 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •